BACK IN STOCK! ORDER NOW BEFORE THEY SELL OUT AGAIN!
OVER 100 UNITS SOLD!
This is a kit to make your very own wifi openhab mqtt controlled sprinkler system.
Both the DIY Kit and Assembled device come with MK-SprinklerSystem firmware version 2 installed so all you have to do is connect it to your server using your mobile phone.
Included in this kit:
|
2 pin Terminal |
x5 |
|
4 Pin Female Header |
x1 |
|
3 Pin Male Header |
x1 |
|
2 pin Jumper |
x1 |
|
5v to 3.3v Regulator |
x1 |
|
1N4001 Diode |
x3 |
|
2n2222 Transistor |
x3 |
|
330 Ohm Resistor |
x6 |
|
5v Relay |
x3 |
|
Esp8266 |
x1 |
|
PCB |
x1 |
|
Plastic Enclosure |
x1 |
|
2 Conductor 22 Gauge Cable |
x1 |
|
Male USB Connector |
x1 |
|
Screws |
x2 |
Please also note: If you would like this kit put together for you, so all you have to do is plug it in and connect it to your OpenHAB or Home Assistant server then click the Assembled option in the drop down.